1 2 3 4 5 6
TEMPERATURE ELEMENTS Thermocouples / RTD Assemblies.

Mineral Insulated Elements

Mineral insulated (MI) sensors are insulated with tightly compacted magnesium oxide powder enclosed in various metal sheaths.

Hot Junction is formed in inert gas atmosphere and tested for Leakage with Nitrogen gas under pressure.

  1. Simplex or Duplex assemblies.

  2. Vibration-Proof, Fast-Response, High Insulation Resistance, Accurate and Stable.

    Termination : Pot Seal with Flying Lead (PSFL), Male Female Connecor (MFC), Connection Head (HEAD) & Junction Box - for multipoint assembly - (J B).

  3. Sheaths can be bent, twisted and flattended to suit application.

  4. Length can be from few inches to several meters.
  • T/C type : K, T, J, E, N with sheath diameters from 1 mm to 19.1 mm.

  • T/C Sheath material : SS 304, 316, 310, 321, 446, *Inconel 600, *Incolloy 800/825.

  • T/C Junctions can be Grounded or Insulated (Un-Grounded).

  • RTD type : PT 100 simplex or duplex, two or three wire system.

 
 
SHEATH
DIAMETER
mm

SIMPLEX

DUPLEX
INSULATION
RESISTANCE (MINI)
Meg Ohm at room temp.

TERMINATION

RTD
DIMENSIONS
T/C RTD
1. 1/5.
2
- YES NO 10 at 100 V DC PSFL, MFC, HEAD, JB  
3 - YES YES 100 at 500 V DC PSFL, MFC, HEAD, JB  
6 6 YES YES 100 at 500 V DC PSFL, MFC, HEAD, JB 6x60 mm bulb with 5mm OD SS 316MI cable extention
8 8 YES YES 500 at 500 V DC PSFL, MFC, HEAD, JB 8x60 mm bulb with 5mm OD SS 316MI cable extention
12.7 - YES YES 500 at 500 V DC PSFL, HEAD  
IR test at elevated temperature also could be provided, if required.
* Manufacturers' Trade Name
1 2 3 4 5 6



Welcome To EEC Company Profile Products Our Performance Enquiry Form